EISK5-100T

Industrial Unmanaged Ethernet Switch with 5 Fast Ethernet ports.

The EISK5-100T Skorpion Switch is a five-port unmanaged Ethernet switch that provides 100 Mb/s performance on all ports in order to accommodate a range of control devices and workstations commonly found in an automation project. For 10 Mbps legacy devices, the switch will automatically reduce its port-speed accordingly. This low-cost compact unit utilizes a rugged metal enclosure and is intended for installation in control panels using DIN-rail mounting. This is a plug-and-play Ethernet switch which requires no configuration. All ports automatically configure their data rate and duplex using the Auto-Negotiation protocol. Depending on the capability of the link partner, communication is set at 10 or 100 Mbps and at either half- or full-duplex. Each port will accommodate either a straight-through or crossover cable by using the Auto-MDIX protocol.

The unit is powered from a choice of low-voltages (AC or DC). Redundant power connections are provided for back-up power schemes. LED indicators assist in troubleshooting network issues.

Features:

• Plug-and-Play operation
• 5 10/100BaseT(X) Ethernet ports
• Shielded RJ-45 connectors
• Auto-negotiation of speed and duplex
• Auto-MDIX supports cable inversion
• DIN-rail mounting
• Rugged metal enclosure
• 24 VAC/VDC powered

Specification:

Ethernet Communications

• IEEE 802.3 10/100 Mbps data rate using RJ-45 connectors, 100 m (max)

LEDs

• Power: Green = power OK
• "L" LEDs:
• Green = 100 Mbps communication established
• Yellow = 10 Mbps communication established
• Flashing = data transmissions occurring
• "D" LEDs:
• Green = Full-duplex communication established
• Off = Half-duplex communication established

Power

• 10–36 VDC 3 W or 24 VAC ±10% 6 VA 47–63 Hz

Envrionmental

• Operating temperature: 0°C to 60°C
• Storage temperature: -40°C to 85°C
• Relative Humidity: 10–95%, non-condensing

Mechanical

• Dimensions: 115 mm x 26 mm x 70 mm
• Shipping weight: 0.45 kg
• IP protection: IP30
• Mounting: TS-35 DIN Rail

Certificates:

• CE Mark; CFR 47, Part 15 Class A; RoHS
• UL 508 Industrial Control Equipment

Manufacturer's warranty: 5 years

---