MC201-F(S)
5-10 days
CAN bus to single-mode fiber converter (SC/ST), transmission distance up to 20 km, 5VDC power supply.
MC201-F allows you to extend CAN bus communication at distances up to 20 km depending on the type of optical fiber. The converter has an external 5VDC power supply and a wide operating temperature range from -40°C to 75°C which in combination with a metal housing allows it to be used in industrial conditions.
The converter will find its application in installations where the CAN transmission is exposed to electromagnetic interference, so the best solution is to change the transmission medium to optical fiber. The device provides a transparent transmission, it is best to use it in pairs between two CAN devices. MC201 has an insulated CAN bus interface (2000VAC), a metal housing IP40 and a wide range of operating temperatures.
Features:
- Support CAN2.0A and CAN2.0B protocol, conform to the ISO/DIS 11898
- Integrate 1 UTD CAN interface and 1 optical interfaces
- CAN interface supports auto-detect baud rate and user-defined baud rate, the baud rate matches the range of 2.5kb~1Mbps
- Support optic fiber transmit CAN network data
- Extend transmission distance to 15km
- CAN interface has electrical isolation protection with 2KVAC isolation voltage; Supports 8KV ESD protection (air discharge)
- Port Data Throughput: 1000fps
- Optional installation of external termination resistors
- Metal casing with IP40 protection
- Support DIN-Rail and wall mounting installation
- Wide operating temperature range from -40°C to 75°C
Specification:
Fiber Interface
- Interface Type: single optical port or dual optical port, SC/ST/FC optional
- Fiber Type: single-mode/multi-mode
- Wavelength: 1310nm
CAN Interface
- Standards: CAN2.0A, CAN2.0B
- CAN Signal: GND, CANL, CANH
- Baud Rate: 2.5K ~ 1000K bps
- Interface Resistor: 120ohm external Terminator optional
- Port Node: load capacity supports 110 nodes
- Interface Protection: 2KVAC isolation protection, 8KV ESD protection (air discharge)
- Interface Type: 5PIN terminals
- Transmit Distance:
- CAN Interface: 40m~10Km
- Single-mode Fiber: 0~15Km
Indicators
- CAN channel status indicator
- LOS: Network error status indicator
- Power indicator
Power
- Input Voltage: 5VDC
- No-load Power: 1.385W@5VDC
- Full-load Power: 1.310W@5VDC
Mechanical Structure
- Shell: IP40 protection grade, high-strength metal casing
- Installation: Wall-mount and Panel-mount
- Weight: 237g
- Size(HxWxD): 22mm x 69mm x 10mm
Environmental
- Working Temperature: -40°C ~ 75°C
- Storage Temperature: -40°C ~ 85°C
Industry Standards
- EMI: FCC Part 15, CISPR(EN55022) class A
- EMS: EN61000-4-2(ESD), Lece3
- Shock: IEC60068-2-27
- Free Fall: IEC60068-2-32
- Shake: IEC60068-2-6
Manufacturer's warranty: 5 years
Approvals: CE, FCC, RoHS, UL5
Tips and inspiration from our blog
28 Jun
0
16 Feb
0
08 Feb
0
16 Feb
0
-P1-250x250h.png "GW1101-1D(RS-485)")
-3-250x250w.png "GW1101-1D(RS-485)")
-DB-P(12-48VDC)-P-1-250x250h.png "GW1101-1DI(3IN1)-DB-P(12-48VDC)")
-DB-P(12-48VDC)-1-1-250x250h.png "GW1101-1DI(3IN1)-DB-P(12-48VDC)")
-250x250.jpg "GW1101-1DI(RS485)")
-TB-1-250x250h.png "GW1102-2D(RS-485)")
-TB-3-250x250h.png "GW1102-2D(RS-485)")
-DB-P(12-48VDC)-250x250.jpg "GW1102-2DI(3IN1)-DB-P(12-48VDC)")
-250x250.jpg "GW1102-2DI(RS485)")
-1-250x250h.png "GW1114-4DI(RS-485)")
-2-250x250w.png "GW1114-4DI(RS-485)")
