5-10 days
Industrial BACnet Multi-Network Router with 1 Ethernet port and 1 MS/TP port.
The BAS Router provides stand-alone routing between BACnet networks such as BACnet/IP, BACnet Ethernet, and BACnet MS/TP-thereby allowing the system integrator to mix BACnet network technologies within a single BACnet internetwork. There are two physical communication ports on the BAS Router. One is a 10/100 Mbps Ethernet port and the other an isolated MS/TP port. Configuration is accomplished via a web page.
The MS/TP port offers an optically-isolated transceiver. It has a removable 3-pin terminal block for the EIA-485 connection. Logically, 255 devices can be addressed. Physically, the number of devices depends upon device loading. Up to 31 full-load EIA-485 devices can share the same MS/TP bus segment as the BAS Router. For half-load devices, there can be 62. All MS/TP standard baud rates are supported-from 9.6 to 76.8 kbps.
The Ethernet port offers a shielded RJ-45 connector. Through auto-negotiation and Auto-MDIX, it automatically matches connections to the attached equipment. Therefore, either straight-through or crossover CAT5 cable can be used for hook-up.
A resident web server allows for commissioning, and troubleshooting via a standard web browser. A reset switch is provided on the router to return the unit to the factory default IP address.
Features:
- Versatile routing between:
- BACnet/IP and BACnet MS/TP
- BACnet Ethernet and BACnet MS/TP
- BACnet/IP and BACnet Ethernet
- BACnet/IP and BACnet Ethernet and BACnet MS/TP
- Two BACnet/IP networks
- 10/100 Mbps Ethernet with auto-negotiation and Auto-MDIX
- Optically isolated MS/TP port
- Web server for commissioning and troubleshooting
- Foreign Device Registration (FDR)
- DIN-rail mounting
- 24 VAC/VDC powered
Specification:
Ethernet Communications
- Compliance: IEEE 802.3
- Data rate: 10/100 Mbps data rate
- Physical layer: 10BaseT, 100BaseTX
- Cable length: 100 m (max)
MSTP Communications
- Compliance: ANSI/ASHRAE 135 (ISO 16484-5)
- Data rate: 9600, 19200, 38400, 76800 bps
- Physical layer: EIA-485
- Cable Length: 1200 m (max)
LEDs
- Power: Green = power OK
- Ethernet:
- Green = 100 Mbps
- Yellow = 10 Mbps
- Flashing = activity
- MSTP: Flashing Green - receive activity
Power
- 24 VDC ±10% 2 W or 24 VAC ±10% 4 VA 47–63 Hz
Envrionmental
- Operating temperature: 0°C to 60°C
- Storage temperature: -40°C to 85°C
- Relative Humidity: 10–95%, non-condensing
Mechanical
- Dimensions: 115 mm x 26 mm x 70 mm
- IP protection: IP30
- Mounting: TS-35 DIN Rail
Certificates:
- CE Mark; CFR 47, Part 15 Class A; RoHS
- UL 508 C22.2 No. 142-M1987
Manufacturer's warranty: 36 months
General technical parameters | |
Ethernet | 1x 10/100BaseT(X) |
Serial port | 1x RS-485 |
Industrial grade | |
IP rating | IP30 |
Operating temperature | 0°C to 60°C |
Input voltage | 24VAC, 24VDC |
Manufacturer's warranty | 3 years |
Mount | DIN rail |
1
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!
Tags:
bacnet
, basrt
, converters
, gateways
, mstp
, contemporary
, controls
, BASRT-B
, Converters & gateways
, BACnet MSTP
, BACnet IP
, to BACnet MS/TP
, to BACnet IP