IMC100-2T1F-1D

Managed industrial media converter, serial device serve, RS-232/422/485 to Ethernet or fiber.

DIN rail mount, working temperature -40°C to 85°C. 5 years Manufacturer's warranty. 1 100M fiber port, 2 100M copper ports and 1 3IN1 serial port with dual power supply support DC12-48V.

IMC100-2T1F-1D is 4-port managed industrial media converter which provides 100M fiber port, 100M copper port and 3IN1 serial port. It adopts DIN-Rail mounting to meet the requirements of different scenes.

The network management system supports message suppression of broadcast, multicast and unknown unicast. Functions like One-Key VLAN, Serial Port Parameter Configuration, Operating Mode Configuration, IP Address Filtering, MAC Address Filtering, Alarm Setting, File Management and User Password Management are also supported. Network management system could provide you with great user experience via its friendly interface design and convenient operation.

The power supply input consists of two independent power supply circuits, which can ensure device’s normal operation when one fails. The hardware adopts fanless, low power consumption and wide temperature and voltage range design. It also has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harshrequirements for EMC. It can be widely used in smart grid, rail transit, smart city, safe city, new energy, aerospace, intelligent manufacturing, military project and other industrial fields.

Features:

• Support 1 100M fiber port, 2 100M copper ports and 1 3IN1 serial port
• Support dual power supply, input voltage: 12~48VDC
• Support -40~85°C wide operating temperature range

Specification:

Standards & Protocol

• IEEE 802.3 for 10Base-T
• IEEE 802.3u for 100Base-TX and 100BaseFX
• IEEE 802.3x for flow control

Interface

• Copper port: 10/100Base-T(X), RJ45, Automatic Flow Control, Full/Half Duplex Mode, MDI/MDI-X Autotunning
• Fiber port: 100Base-FX, optional SC/ST/FC
• Serial port: RS-232/422/485 (3IN1)

Serial Port

• Serial ports: 1 RS-232/422/485
• RS-485 signal: D+, D-, GND
• RS-422 signal: T+, T-, R+, R-, GND
• RS-232 signal: RX, TX, GND
• Check bit: None, Even, Odd
• Data bit: 7bit, 8bit
• Stop bit: 1bit, 2bit
• Baud rate: 300bps-115200bps
• Direction control: RS-485 adopts automatic data flow control technique
• Load capability: RS-485 supports 32-point polling environment

LED Indicator:

• Running indicator, port indicator, power supply indicator, serial port receiving and sending indicator

Switch Property

• Transmission mode: store-and-forward
• MAC address: 16K
• Packet buffer size: 4Mbit
• Backplane bandwidth: 5.6G

Power:

• 12~48VDC, dual power supply redundancy
• 4-pin pitch 7.62mm terminal block
• Consumption:
• No-load: 3.00W@24VDC
• Full-load: 3.24W@24VDC

Environment

• Operating temperature: -40~85°C
• Storage temperature: -40~85°C
• Relative humidity: 5%~95% (no condensation)

Mechanical:

• Housing: IP40 protection, metal
• Installation: DIN-Rail mounting
• Dimension (WxHxD): 36mm x 110mm x 97mm
• Weight: 410g

Industrial Standards

• IEC61000-4-2 (ESD, Electrostatic Discharge), Level 3
• Air discharge: ±8kV
• Contact discharge: ±6kV
• IEC61000-4-4 (EFT, Electrical fast transient), Level 3
• Power supply: ±2kV
• Ethernet port: ±1kV
• IEC61000-4-5 (Surge), Level 3
• Power supply: differential mode ±1kV, common mode ±2kV
• Signal: differential mode ±1kV, common mode ±2kV
• Shock: IEC 60068-2-27
• Free Fall: IEC 60068-2-32
• Vibration: IEC 60068-2-6

Certification: CE, FCC, RoHS

Manufacturer's warranty: 5 years

---