3-4 days
Industrial PROFINET slave to KNX TP converter, housing type B (wide), DIN rail mount.
HD67818 allows to connect PROFINET devices like Siemens PLC with KNX network like lighting systems to exchange the informations between the nets.
Configuration:
Thanks to the SW67818 software on your PC you can:
- Define the parameters of PROFINET line
- Define the parameters of KNX line
- Define the KNX messages that the Converter can accept
- Define the KNX frames that the Converter sends through the KNX line
- Define the map of KNX byte that must be written in the PROFINET side
- Define the map of which PROFINET I/O must be written in KNX messages
- Update the device
Characteristics:
- Up to 1440 bytes in reading and 1440 bytes in writing
- Triple isolation between KNX - Power Supply, KNX – Ethernet, Power Supply - Ethernet
- Bi-directional information exchange between KNX bus and PROFINET bus
- Mountable on 35mm Rail DIN
Specifications:
- Ports: 1x KNX; 1x Ethernet
- KNX protocol: KNX TP
- PROFINET protocol: PROFINET slave
- Data Rates KNX: 9600 bit/s
- Data Rates Ethernet: 10/100 Base-T Autosensing
- KNX connector: KNX Bus connector
- Ethernet connector: RJ45
- Power supply: 8...24VAC; 12...35VDC
- Power supply connector: 2way 5mm terminal block
- Operating temperature: -40°C to +85°C (-40°F to +185°F)
- Dimensions: 71 mm x 60 mm x 95 mm (DxWxH)
- Weight: 200g approx
- Mechanical fixing: 35mm DIN Rail mount
- Software: SW67818
- ORDER CODE: HD67818-KNX-B2
Configurator – Software SW67818 FREE DOWNLOAD
Tips and inspiration from our blog
28 Jun
0
16 Feb
0
08 Feb
0
16 Feb
0
