Menu
Your Cart

AFL

AFL
To be confirmed

Bare steel and aluminum wires for overhead power lines.

Characteristics:

  • Material:
    • Hard aluminum wires according to PN-EN 60889
    • Steel wires type ST1A according to PN-EN 50189
  • Structure of the wire: Single or multi-wire core made of galvanized steel wires, lubricated, subsequent layers made of aluminum wires twisted concentrically, the twisting directions of adjacent layers must be opposite and the direction of the outer layer should be right
  • Application: For the construction of overhead power lines
  • Packing: On drums

Complies with: PN-EN 50182


Cable parameters
Core Aluminium, Steel
Maximum allowable tensile stresses 146.05 kN, 169.84 kN, 183.74 kN, 113.35 kN, 125.37 kN, 159.81 kN, 206.56 kN, 5.8 kN, 8.95 kN, 12.37 kN, 16.81 kN, 22.75 kN, 33.72 kN, 45.91 kN, 55.04 kN, 67.34 kN, 84.64 kN, 103.59 kN, 27.93 kN, 34.96 kN, 43.17 kN, 54.03 kN, 66.8 kN, 80.54 kN, 106.2 kN, 129.56 kN, 145.87 kN, 239.96 kN, 9.34 kN, 14.35 kN, 17.87 kN, 26.49 kN, 32.7 kN, 41.15 kN, 51.17 kN, 70.83 kN
Standard packaging On drums
Outer diameter [mm] 34.5, 37.2, 38.7, 26.1, 27.9, 31.5, 36.0, 5.4, 6.75, 8.1, 9.6, 11.3, 13.4, 15.7, 17.3, 19.2, 21.7, 24.2, 11.2, 12.6, 14.0, 15.8, 17.9, 19.6, 22.6, 25.2, 26.9, 34.2, 5.85, 7.35, 8.25, 9.0, 10.0, 11.3, 12.8, 15.0
Cable weight [kg/km] 2114, 2456.9, 2661, 1348, 1540.3, 1963.5, 2549.7, 61.6, 96.3, 138.7, 194.8, 267.5, 365.8, 502, 609.9, 755.2, 965.4, 1201.4, 276.8, 350.3, 432.5, 547.4, 703.1, 847.7, 1112.8, 1386.2, 1585.7, 2555.9, 87.1, 137.6, 173.3, 223.6, 276.1, 349.4, 448.8, 621.2

Write a review

Note: HTML is not translated!
Bad Good
1

We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!

We use cookies to offer you the best experience on our site. By continuing to browse the site, You are agree to use cookies.