SW485GI

Isolated (3000V) RS-485/422 repeater or RS-232 to RS485/422 converter.

It can use one function at the same time. The product must have 12-36VDC power input, optic-electrical isolation more than 3KV. Have small volume, 3000m transfer distance, high rate, steadily performance and so on. It is abroad used in industry control system, It is a best performance and price interface converter and Repeater.

Features:

• Support DIN-rail, Terminal block connection
• 12 ~ 36VDC Power input (3 bit terminal block)
• Adopt itself adapt interface technique, no use for setup switch
• Adopt ADDC, auto distinguish and data transfer direction
• Can use for RS485/422 repeater and RS232 to RS485/422 converter, but just use one function at same time
• Supply 3000V optic-electrical isolation, 1500W surge protection
• Reach up to 3000m at the rate of 9600bps

Specification:

• Standards: EIA RS-232C, RS-485, RS422 standard
• RS-232 signal: TX, RX, GND
• RS-422 signal: T+, T-, R+, R-, GND
• RS-485 signal: D+, D-, GND
• Working mode: Asynchronism, point to point or multi point, 2 wire half-duplex, 4 wire full duplex
• Baud rate: 300~115200bps, auto test serial signal rate detect signal speed automatically, zero delay time
• Flow control: Data direction auto-turnaround, no flow control is required
• Transfer distance:
• RS-485/422 side: 3km (9600bps)
• RS-232 side: no less than 5m
• Max number of drops: 128 nodes
• Optical isolation: 3000V
• Port protect: 1500W surge protection, 15KV ESD protection
• Connector:
• RS-232 side DB9 female
• RS-485/422 side 5 bit terminal block

Power:

• Input Voltage: 12 ~ 36VDC Power input (3 bit terminal block)
• No-load consumption: 0.3W@12VDC
• Full-load consumption: 0.3W@12VDC

Environmental:

• Operating temperature: -40°C to 75°C
• Storage temperature: -40°C to 85°C
• Humidity: 5% to 95% (no condensation)

Appearance:

• Dimensions: 100.0mm x 69.0mm x 22.0mm
• Material: Iron (shell)
• Color: White
• Weight: 200g

Manufacturer's warranty: 3 years

Certificates: FCC, CE, RoHS approvals

---