5-10 days
IoT wireless communication router supported 5G networks.
F-NR200 is a 5G industrial CPE for the Internet of Things (IoT), it uses a high-performance industrial level 32-bit communication processor and wireless module, embedded with the real-time operating system as the software platform, and using 3G/4G/5G cellular network to provide users with wireless long-distance large data transmission function.
Features:
- 5G CPE supports NSA and SA networks, compatible with all operators.
- Support 5G/4G, wired (optical fiber and WAN) intelligent switching.
- 5G CPE support POE (802.3AF) power supply.
- Support dual-band WIFI (2.4G and 5.8G).
- Support local data storage to ensure that data is not lost.
- Full industrial design, protection grade IP68.
- 5G CPE support IPV6/IPV4.
Specification:
Cellular Specification
- Module: Industrial grade wireless module
- Frequency:
- Bandwidth:
- Power: < 23dBm
- Sensitivity: <-97dBm
- 5G NR: n1/n2/n3/n5/n7/n8/n20/n28/n41/n66/n71/n77/n78/n79
- LTE:B1/B2/B3/B4(66)/B5(18/19/26)/B7/B8/B12(17)/B13/B14/B20/B25/B26/B28/B29/B30/B38/B39/B40/B41/B42/B43/ B46/ B48/B71
- Remarks: Different modules support different network standards
- 5G NR DL 3.4Gbps UL 350Mbps
- LTE Cat20 DL 2.0Gbps UL 150Mbps
- DL 42Mpbs UL 5.76Mbps
WIFI Specification
- Frequency:
- Bandwidth:
- Security: WEP, WPA, WPA2 encryption WPS(optional)
- Power: 26dBm 11b)), 21dBm 11ac/MCS7/HT40, 20dBm 11ac/MCS9/HT80
- Sensitive: <-72dBm@54Mpbs
- IEEE802.11b/g/n 2.4G AP mode, Station mode (Option)
- IEEE802.11ac, 5.8G, AP mode, Station mode (Option)
- IEEE802.11b/g 54Mbps
- IEEE802.11n 300Mbps
- IEEE802.11ac 866Mbps
Hardware System
- CPU: Industrial-grade 32-bit communication processor
- FLASH: Nor flash 16MB NAND flash 128MB
- DDR3: 512MB
Interfaces
- WAN: 1x 1000M ETH port (RJ45water proof), auto adapt MDI/MDIX, built in 1.5KV ESD
- LAN: 1 x 1000M ETH port (RJ45water proof), auto adapt MDI/MDIX, built in 1.5KV ESD
- Optical Fiber:
- Serial
- Indicators
- Antenna
- SIM/UIM: Standard drawer type, 1.8V/3V SIM/UIM card, built-in 15KV ESD protection
- Power:Terminal interface, built-in power reverse protection
- USB: USB2.0 (Built-in)
- Reset button: Through this button, the parameter configuration can be restored to the factory
- 1 x 1000M fiber interface (External all-plastic waterproof interface)
- Auto adapt MDI/MDIX, built in 1.5KV ESD
- 1 x RS232/RS485 serial port (External all-plastic waterproof interface), built in 1.5KV ESD
- Data bit:5, 6, 7, 8
- Stop bit:1,1.5(optional), 2
- Check: NONE, ODD, EVEN, SPACE (optional) and MARK (optional)
- Baud rate:2400~115200bits/s
- "PWR", "SYS", "2.4G","5.8G", "Online","Signal"
- Remarks: Built-in indicator light
- Cellular 4 x waterproof SMA female antenna, characteristic impedance 50 ohms
- WIFI 4 x waterproof SMA male antenna, characteristic impedance 50 ohms
Power Supply
- Standard: DC 12V/1.5A and Support POE (802.3af) power supply
- Range: DC 9~36V
- Consumption: <1.2A (12V)
Physical Properties
- Shell: Metal shell, protection grade IP68
- Size: 259x259x45 mm(Does not include antenna and mounting parts)
- Weight: 2480g
Others
- Operating Temperature: -35~+75ºC((-31~+167ºF)
- Storage Temperature: -40~+85ºC((-40~+185ºF)
- Relative Humidity: 95% (No condensation)
Order Information
- F-NR200: Cellular (5G NR), 2.4G/5G WIFI, SIM*1
Warranty: 1 year
General technical parameters | |
USB | 1x USB 2.0 |
Serial port | 1x RS-232/485 |
Wireless | |
Cellular modem | 1x 5G |
Industrial grade | |
Casing | Metal |
IP rating | IP68 |
Operating temperature | -35°C to 75°C |
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!
Tags:
nr200
, industrial
, routers
, with
, four
, faith
, F-NR200
, Industrial Routers
, with Wi-Fi
, 5G