Multi-conductor, heat-resistant cables with insulation and rubber coating, for mobile and portable receivers.
Cables intended for industrial and agricultural workshop equipment, boilers, electric heaters, portable lamps, electric tools such as drills, circular saws, household electrical tools, as well as portable motors or machines on construction sites or farms, etc., also for laying on permanent in temporary buildings and barracks for power supply. They are suitable for wiring construction elements in lifting devices, machines, etc. For use in dry, wet and moist rooms.
Also for low temperature outdoor use for caravans, for car heaters and campsites. Use with voltages up to 1000V alternating current is permissible in permanent protected installations (inside installation pipe or certain devices) as well as for connections of lifting motors or similar.
Construction:
- Cores: Copper tinned round multi-core class 5 according to PN-EN 60228
- Insulation: Heat-resistant EPR type EI7 rubber compound
- Coating: Heat-resistant rubber compound, oil-resistant and non-spreading type EM7
- Core identification (according to PN-HD 308 S2):
- 2-wire: blue, brown
- 3-wire: green-yellow, blue, brown
- 4-wire: green-yellow, brown, black, gray
- 5-wire: green-yellow, blue, brown, black, gray
- over 5 veins: green-yellow, other black with digital overprint
- Core identification (Main core colors according to HD 308, DIN VDE 0293-308):
- G (with green-yellow vein):
- 3-wire: green-yellow, blue, brown
- 4-wire: green-yellow, brown, black, gray; Green-yellow, blue, brown, black
- 5-wire: green-yellow, blue, brown, black, gray
- more than 5 veins: green-yellow, other black with white numbering
- x (without a green-yellow vein):
- 2-wire: blue, brown
- 3-wire: Brown, Black, Gray; Blue, Brown, Black
- 4-wire: Blue, Brown, Black, Gray
- 5-wire: Blue, Brown, Black, Gray, Black
- more than 5 veins: Black with white numbering
Characteristic:
- Explanation of symbolism: H07BN4-F - Conductor made according to harmonized standard (H), for voltage 450 / 750V (07), with insulation from heat-resistant rubber EPR (B) and a coating of heat-resistant oil-resistant rubber and non-spreading flame (N4), with flexible conductors (F)
- Maximum temperature of the conductor during cable operation: +90°C
- The minimum ambient temperature for laying cables: -20°C
- Maximum core temperature during short circuit: + 250°C
- Maximum permissible load: 15 N per mm² of copper cross-section
- Test voltage testing: 2000V
- Resistance to flame spread: PN-EN 60332-1-2
- Standard packaging: in reels of 50 or 100 m and on drums of 500 m. There is a possibility of offering other lengths of sections and types of packaging
Compliant with: PN-EN 50525-2-21
Industrial grade | |
Operating temperature | -40°C to 90°C |
Cable parameters | |
Minimum bending radius | 3D, 4D, 5D, 6D, 8D |
Core | Copper |
Insulation | Ethylene-propylene rubber (EPR) |
Installation temperature | -20°C to 90°C |
Maximum short circuit temperature | 250°C |
Test voltage | 2.5 kV |
Standard packaging | Discs, On drums |
Coating | Rubber compound |
Resistance to flame spread | EN 60332-1-2 |
Number of wires in the cable | Multi-core |
Outer diameter [mm] | 5.9, 6.6, 7.5, 8.2, 10.1, 11.4, 13.2, 14.4, 17.1, 19.3, 22.2, 23.7, 26.3, 29.4, 31.5, 35.7, 38.4, 43.8, 48.5, 8.3, 9.3, 11.1, 12.6, 14.2, 22.0, 25.7, 9.0, 10.0, 11.9, 13.5, 15.2, 20.7, 23.5, 27.5, 29.7, 40.1, 46.5, 49.4, 55.1, 61.6, 67.0, 80.0, 9.9, 11.0, 13.1, 14.9, 16.9, 22.5, 30.5, 32.9, 39.5, 44.6, 52.0, 54.8, 61.3, 68.6, 10.9, 12.1, 16.6, 18.7, 24.8, 28.5, 33.7, 18.8, 25.6, 26.0, 30.2, 30.6, 35.2 |
Cable weight [kg/km] | 50, 66, 89, 116, 180, 249, 356, 468, 655, 879, 1148, 1410, 1749, 2127, 2699, 3359, 4289, 5391, 6800, 88, 113, 165, 222, 293, 530, 721, 1029, 106, 137, 199, 270, 360, 651, 899, 1287, 1644, 2325, 3089, 4074, 4927, 6121, 7472, 9507, 14000, 132, 170, 248, 337, 458, 813, 1123, 1649, 2108, 2986, 3986, 5304, 6365, 7939, 9708, 163, 209, 303, 424, 571, 992, 1389, 2030, 273, 388, 530, 461, 658, 929, 662, 962, 1356, 854, 1254, 1205, 1792 |
Working conductor cross section [mm2] | 1.0, 1.5, 2.5, 4.0, 6.0, 10.0, 16.0, 25.0, 35.0, 50.0, 70.0, 95.0, 120.0, 150.0, 185.0, 240.0, 300.0, 400.0, 500.0, 630.0 |
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!