IN775FGL00SO000- Fujitsu to Modbus, BACnet, KNX gateway

Industrial gate with Fujitsu VRF system for applications home automation

Fujitsu App is specially designed to enable bi-directional control and monitoring of Fujitsu systems VRF from your home automation system. The solution allows integration of up to 16 indoor units and 12 outdoor units.

Features:

• UL Certified
• Direct access to the outdoor unit's communication bus
• Scanning: Automatic identification of units present in the VRF system
• Outdoor unit signals are available for integration
• Integration with any IP home automation system thanks to our open ASCII protocol
• Compatible with drivers available on the Intesis website
• Direct Ethernet connection to the local IP network at home
• Up to 6 TCP clients (incoming sockets) are supported
• Configuration via IP or USB port (console)
• Easy integration with the Intesis MAPS configuration tool
• Automatic updates of Intesis MAPS software and interface

Specification:

Ports:

• EIA-485:BACnet MS/TP, Modbus RTU
• KNX: KNX bus
• Ethernet:
• As TCP/IP port: BACnet/IP, Modbus TCP and home automation
• As a console port: Can be connected to a PC for configuration

Power:

• Connector: 1-pin screw connector (3 poles)

• Input voltage: 12 ... 36 VDC +/-10%, Max.: 250 mA, 24 VAC +/-10% 50-60 Hz, Max.: 127 mA, recommended 24 VDC

Ethernet:

• 1 x Ethernet 10/100 Mbps RJ45

Appearance:

• Housing: Plastic, type PC (UL 94 V-0)
• Dimensions: 90x106x58 mm
• Color: Light gray. RAL 7035
• Protection rating: IP20 (IEC60529)

Installation:

• Wall: 25 mm (1") long M3 screws. Secure mounting: less than 2 meters (6 ft)
• DIN rail (recommended installation) EN60715 TH35

Environmental:

• Operating temperature: 0°C to 60°C
• Humidity: 5% - 95%, non-condensing

Warranty: 36 months

---